Product Catalog - Page 1

---

Neutralizer Plus
Features	Benefits
Unique overhead design Optical Light Auto Balancing Auto Shutdown 3 Separate 3 5/8" fans Internal emitter needles Operator lockout key Soft touch panel Visual balance indicator	Provides more consistent and wider coverage Saves valuable workbench space Provides additional light for workbench area Monitors continually for optimum performance Rapid neutralization with no solderability problems Air delivery 50-150 CFM Will not cause operator discomfort Eliminates risk of settings being tampered with Easy to use Verifies proper operation of unit
Neutralizing Air Nozzle
Features	Benefits
Detachable air hose and nozzle Rugged Construction Adjustable air stream Ozone output less than 0.05 PPM	Ready-to-use, facilitates servicing Long life Flexibility in uses Environmentally friendly
Conductive Foam
Features	Benefits
Corrosion resistant Uniform protection High density, low density	Ideal for long term storage Will not affect the solderability of device leads Two grades available
Statguard Dissipative Floor Finish
Features	Benefits
Static Dissipative Can be applied on many hard surfaces or sealed floors including vinyl, linoleum, rubber, asphalt, and concrete Reduces tribocharging Cross-linked polymer Surface restivity: 10**8 ohms/sq pH: 8.9 Density: 8.4lbs/gal	Provides excellent charge dissipation and grounding Multiple uses Ideal for electronic and manufacturing assembly and test areas Long lasting finish, durable Coverage: 2,000 - 2,500 square feet per gallon Solids: 18% Water soluble
Conductive Polyethylene - Type P
Features	Benefits
Polyethylene material Lays flat Hard Surface RTT: 3.0 x 10**4 Ohms per ASTM-D257 Volume Restivity: <3.0 x 10**3 Ohms/cm Charge Decay: <0.01 seconds Thickness: 0.060" and .125" Color: Black	Durable for high traffic areas Resists acids and alkali solutions Humidity independent Added safety Ideal for heavy carts and chairs
Transparent Shielding Bags - Metal Out
Features	Benefits
Metal outer layer Anti-abrasion exterior Greater than 40% light transmission Available with zipper Restivity of outer surface: < 10**9 ohms/sq Restivity of metal layer: 100 ohms/sq Restivity of inner surface: < 10**11 ohms/sq Charge decay: < 50 micro sec Thickness: 3.5mil	Provides more rapid charge dissipation when the bag touches a grounded surface Shields against external static Lower charge retention, high performance Allows for identification of bag contents Convenient seal
Military Field Service Kit
Features	Benefits
Specifically designed to comply with MIL-W-87893A (Type III) Size 22" x 24" with two pockets 11" x 8"	Surface Restivity: 10**8 - 10**9 Ohms/sq per ASTM-D257
REZTORE Antistatic Surface & Mat Cleaner
Features	Benefits
Static dissipative Non-toxic Leaves no insulative residue Removes contaminating particulate Low volatility Available in dissipative pop-up dispenser as "Stat-wipes"	Cleans work surfaces Safe to use Will not degrade surface Eliminates possible ESD event Compatible with most clean room specs Ideal for cleaning static dissipative mats, conductive mats, electronic instrumentation, medical equipment, computer monitors and keyboards
Hook and Loop Wrist Straps
Features	Benefits
D-Ring return loop Sewn inner conductive surface 4mm solid steel stud	Quick and easy adjustment No exposed conductive surfaces Long lasting
Common Point Ground for Bench Mats & Wrist Straps
Features	Benefits
Two banana jacks Low profile Available with or without a 1 megaohm resistor to mat Extra ring terminal included Available as a kit	Two people are able to ground wrist straps simultaneously Reduce the snag of cloths and work instruments Versatile Custom installation The kit includes 1 common point ground, a universal snap kit and 1 ground label
Type F Dissipative Corrugated Vinyl
Features	Benefits
Corrugated Surface Vinyl Lays flat RTT: 5.4 x 10**9 per ANSI EOS/ESD-S7.1 RTG: 7.4 x 10**9 per ANSI EOS/ESD-S7.1 Charge Decay: .03 sec per EIA-541 Color: Brown	Specifically designed for floor mats and runners Provides excellent traction Easy to cut Added Safety #16005 (48x72") $102.00 #16010 (48x40') $420.59
Type C Conductive Corrugated Rubber
Features	Benefits
Corrugated Surface Rubber Material Lays Flat RTT: 2.6 x 10**4 - 5.0 x 10**4 Ohms per ANSI EOS/ESD-S4.1 @ 10 volts RTG: 5.8 x 10**4 - 5.0 x 10**5 Ohms per ANSI EOS/ESD-S4.1 @ 10 volts Color: Black	Heat and Chemical Resistant Excellent for wave solder areas, non slip Added safety #50010 (36x36") $82.65 #50015 (36" x 75') $1,878.98
Type G2 Conductive Rubber
Features	Benefits
Rubber Material Lays Flat RTT: 1.0 x 10**5 - 5.0 x 10**5 Ohms per ANSI EOS/ESD-S7.1 RTG: 4.0 x 10**4 - 5.5 x 10**5 Ohms per ANSI EOS/ESD-S7.1 Charge Decay: 0.006 seconds Color: Black	Holds up well against solder, fluxes, acids and abrasian Added safety #50007 (48x72") $161.21 #50008 (48" x 40' roll) $795.59
Type P Conductive Polyethylene
Features	Benefits
Polyethylene material Hard Surface Lays Flat RTT: 10**3 -10**4 Ohms per ANSI EOS/ESD-S7.1 RTG: 10**3 -10**4 Ohms per ANSI EOS/ESD-S7.1 Color: Black Thickness from 0.060" to 0.125"	Durable for high traffic areas Resists acids and alkali solutions Added safety Humidity independent Ideal for heavy carts and chairs #15010 (48x96") $85.83 #15015 (48x96") $170.15 #15035 (48x72") $133.16
Type T2 Dissipative Dual Layer Rubber
Features	Benefits
Dual purpose rubber matting material Rubber Material Smooth Surface RTT: 4.61 x 10**6 - 9.0 x 10**6 Ohms per ANSI EOS/ESD-S4.1 @ 100 volts RTG: 2.32 x 10**6 - 4.68 x 10**6 Ohms per ANSI EOS/ESD-S4.1 @ 100 volts Charge Decay: <0.01 - 0.02 sec Color: Beige, Blue, Grey	Can be used as a dissipative or a conductive matting product Superior resistance to heat, abrasion and chemicals Easy to clean and maintain #66030 (24x36") $51.50 #66035 (24"x48") $63.67 #66060 (24"x40' roll) $416.15 #66065 (36"x40' roll) $624.24 #66090 (48"x40' roll) $832.31 #66115 (30"x40' roll) $520.20
Type Z2 3 Layer Dissipative Vinyl
Features	Benefits
Three layer conductive vinyl Three layer electrical chacteristics Cushion vinyl backing Durable top layer RTT: 1.45 x 10**6 - 4.04 x 10**6 Ohms per ANSI EOS/ESD-S4.1 @ 100 volts RTG: 1.26 x 10**6 - 2.0 x 10**6 Ohms per ANSI EOS/ESD-S4.1 @ 100 volts Charge Decay: <0.01 sec Color: Beige, Blue, Grey	Provides a lower resistance path to ground for faster dissipation of static charges Cost effective Provides protection against physical damage Abrasion resistant #42450 (24x36") $48.36 #42455 (24x48") $56.64 #42510 (24"x50' roll) $382.50 #42525 (48"x50' roll) $765.00
Type B Plus Dissipative Homogeneous Vinyl
Features	Benefits
Surface resistance and resistance to ESD ground is less than 10**9 Ohmns Extruded homogeneous vinyl Reversible vinyl RTT: 1.40 x 10**8 - 4.17 x 10**8 Ohms per ANSI EOS/ESD-S4.1 @ 100 volts RTG: 2.46 x 10**8 - 1.03 x 10**9 Ohms per ANSI EOS/ESD-S4.1 @ 100 volts Charge Decay: <0.01 sec Color: Blue, Grey, Green	Meets EIA-625 standards Use as either bench or floor mat Easy to cut, durable Smooth finish on one side and non-glare finish on the other; extends mat life #16350 (24"x40' roll) $332.17 #16355 (24"x100' roll) $831.27 #16360 (30"x40' roll) $415.63 #16365 (30"x100' roll) $1,039.08 #16360 (36"x100' roll) $1,246.90 #16360 (48"x100' roll) $1,662.53
Type B Dissipative Homogeneous Vinyl
Features	Benefits
Extruded homogeneous vinyl Reversible vinyl Smooth finish Non glare finish RTT: 4.6 x 10**9 - 5.8 x 10**9 Ohms per ANSI EOS/ESD-S4.1 @ 10 volts RTG: 3.8 x 10**9 - 1.3 x 10**10 Ohms per ANSI EOS/ESD-S4.1 @ 10 volts Charge Decay: <0.05 sec Color: Beige, Blue, Brown	Use as either bench or floor mat Easy to cut, durable Smooth finish on one side and non-glare finish on the other; extends mat life Easy to clean and maintain Easy to identify parts #16201 (24"x36") $37.57 #16202 (24"x48") $45.11 #16250 (24"x40' roll) $262.82 #16255 (24"x100' roll) $657.03 #16256 (30"x40' roll) $328.51 #16257 (36"x100' roll) $985.54 #16258 (48"x100' roll) $1,309.07

---

---